Cast In Sleeve to suit 150NB (165.1mm O.D) bollards
Cast in sleeves are used to prevent chipping of the concrete area surrounding the bollard when in position. The sleeve allows the bollard to be inserted correctly and provides a precise locking slot for the bollard.
Holds 1 x 150NB (165.1mmO.D) bollard
Ordering details : SLV150R
When using this product on a new installation / project, we also recommend using the cover plate to suit which is model number SDCP150 or the heavy duty model HDCP150 where heavy vehicles are used.
For installation details, please refer to the download resources
Size: 100 x 150
Fixing Type: Commercial
Finish: New
Colour: Grey
Specifications Lorem Ipsum
You may also be interested in
$68.20Special Offer
The GT-Lock is the ideal way to secure your garage door internally.
The GT-Lock is the ideal way to secure your garage door.
Select from two models Internal or External. The external type provides a protective shroud for protection against bolt cutters or attack from the front or top.
Suitably installed on most types of garage doors and was originally designed to protect vehicles and garage tools against theft.
Vehicle Protection or just need to take security the next level by ‘target hardening’ your property? The GT Lock is an ideal solution. Trusted across Australia and installed by leading locksmiths, handymen and builders.
Easy D.I.Y installation if you are handy on the tools.
The product may be installed on residential or commercial doors for protection against illegal forced entry. Ideally the unit should be installed in the centre of the door if under 3m and where the roller door is greater than 3m we recommend the installation of two GT Locks evenly spaced from the centre of the door out.
We also have the Internal GT-Lock model which is suited to buildings with alternate entry/exit such as a side fire door or rear entry door to the garage to a unit.
Product is supplied with all accessories
4 x M8 Galvanised Cup Bolts with Nuts
4 x Ramset ShureDrive Anchors SDM 06050
1 x Backing plate for bottom of roller door support with pre-punched square holes.
Fully Zinc Passivated and features a hardened Herc Alloy shackle.
Also included is a stainless-steel hinging pin for superior operational protection.
Quick and Easy installation. DIY. See specifications tab for pricing.
See specifications tab for pricing
Contact us at [email protected]
For tips on how to install, see the video under the specifications tab below.
Original price was: $90.00.$68.20Current price is: $68.20.
$120.00Special Offer
Secure storage holder to suit 80NB locking removable bollards. Available with masonry anchors.
Holds 2 bollards 88.9mm OD
Original price was: $165.00.$120.00Current price is: $120.00.
$42.00Special Offer
Heavy Duty Cover plate to suit existing 90mm holes. To be used when bollards are removed from the ground hole position. For light traffic areas we also have the more popular cover plate SDCP80.
Covers one 90mm hole, can be used for all 90mm Impact security bollards including stainless steel bollards.
Ordering details : HDCP80
Dimentions of product: lower body that sits in hole is 75mm diameter. (designed to fit holes from 77mm – 90mm)
Top flat section 150mm diameter
Designed for high traffic areas
Original price was: $58.00.$42.00Current price is: $42.00.
Roller Door Security
When fitted the roller shutter cable assembly increases the security on any roller shutter door by not allowing the door to be opened/lifted without the bollards being removed.
Reviews
There are no reviews yet.