Local Area Protective Services
LAPS has been at the forefront of protecting people and property using physical perimeter and electronic security systems since 1994
Our Services
Featured Products
The Spartan Impact Security® locking and removable bollards are by far the most popular bollards we sell. They are the preferred choice in the automotive industry to secure car yards, driveways, garage roller doors or any open space. Our bollards are used extensively in all areas including residential (protecting vehicles), commercial & industrial to protect people and property. Available in two models the Spartan and Spartan Plus Impact Security® bollards offer heavy duty protection through a product that has been around for more than 20 years.
$275.00
A tidy solution for tethering your dog using the restraint hook. Rex dog parking tether can be easily installed to any appropriate surface, offering a straightforward method to secure your pet.
Original price was: $85.00.$55.00Current price is: $55.00.
The GT-Lock is the ideal way to secure your garage door internally.
The GT-Lock is the ideal way to secure your garage door.
Select from two models Internal or External. The external type provides a protective shroud for protection against bolt cutters or attack from the front or top.
Suitably installed on most types of garage doors and was originally designed to protect vehicles and garage tools against theft.
Vehicle Protection or just need to take security the next level by ‘target hardening’ your property? The GT Lock is an ideal solution. Trusted across Australia and installed by leading locksmiths, handymen and builders.
Easy D.I.Y installation if you are handy on the tools.
The product may be installed on residential or commercial doors for protection against illegal forced entry. Ideally the unit should be installed in the centre of the door if under 3m and where the roller door is greater than 3m we recommend the installation of two GT Locks evenly spaced from the centre of the door out.
We also have the Internal GT-Lock model which is suited to buildings with alternate entry/exit such as a side fire door or rear entry door to the garage to a unit.
Product is supplied with all accessories
4 x M8 Galvanised Cup Bolts with Nuts
4 x Ramset ShureDrive Anchors SDM 06050
1 x Backing plate for bottom of roller door support with pre-punched square holes.
Fully Zinc Passivated and features a hardened Herc Alloy shackle.
Also included is a stainless-steel hinging pin for superior operational protection.
Quick and Easy installation. DIY. See specifications tab for pricing.
See specifications tab for pricing
Contact us at [email protected]
For tips on how to install, see the video under the specifications tab below.
Original price was: $90.00.$68.20Current price is: $68.20.
Standard Duty cover plate to suit existing 77-90mm ground holes. To be used when bollards are removed from the ground hole position. Ideal for pedestrian and light traffic areas. If you require the heavy duty model, the part number is HDCP80
Covers one 77-90mm hole, can be used for all 88.9mm / 90mm Impact Security ® removable bollards, Securapost 90mm removable bollards including Vogue stainless steel models.
Ordering details : SDCP80
Dimension of product: lower body that sits in hole is 75mm diameter. (designed to fit holes from 77mm – 90mm)
Designed for light pedestrian and low traffic areas.
Top flat section 150mm diameter with a 3mm profile. (ideal for forklifts and pedestrian areas)
Original price was: $38.00.$25.00Current price is: $25.00.
Secure storage holder to suit 80NB locking removable bollards. Available with masonry anchors.
Holds 2 bollards
Original price was: $165.00.$120.00Current price is: $120.00.
Allows storage of two LAPS Impact Removable bollard. Will also suit Leda Securapost locking and removable bollards. SSH280 twin available
Supplied with M12 masonry anchors.
Holds 1 bollard. Twin holder also available, search for model SSH280
Original price was: $130.00.$99.00Current price is: $99.00.
Roller Door Security
When fitted the roller shutter cable assembly increases the security on any roller shutter door by not allowing the door to be opened/lifted without the bollards being removed.
Many high end supply chain warehouses insist on using this product and when combined with LAPS Spartan Impact Security Locking and Removable bollards provides an increased level of security on your premises to protect against illegal forced entry or ram raid style attacks.
When ordering part number Model RSCA55 to your order.When fitted the roller shutter cable assembly increases the security on your roller shutter door by not allowing the door to be opened/lifted without the bollards being removed.
In most cases the cables are installed inside behind the roller door where possible. For high threat premises, we recommend the installation of LAPS Impact Security bollards outside the roller door as well as inside combined with the roller door cables.
If you would prefer a padlock style solution, see the GT-LOCK
Ask about our alarm systems and surveillance packages to total peace of mind.
Original price was: $85.00.$55.00Current price is: $55.00.
Stainless Steel Cover with a galvanised steel sleeve
Designed to suit the following bollards;
See specifications tab below for additional information
The GT-Lock is the ideal way to secure your garage door.
Select from two models Internal or External. The external type provides a protective shroud for protection against bolt cutters or attack from the front or top.
Suitably installed on most types of garage doors and was originally designed to protect vehicles and garage tools against theft.
Vehicle Protection or just need to take security the next level by ‘target hardening’ your property? The GT Lock is an ideal solution. Trusted across Australia and installed by leading locksmiths, handymen and builders.
Easy D.I.Y installation if you are handy on the tools.
The product may be installed on residential or commercial doors for protection against illegal forced entry. Ideally the unit should be installed in the centre of the door if under 3m and where the roller door is greater than 3m we recommend the installation of two GT Locks evenly spaced from the centre of the door out.
We also have the Internal GT-Lock model which is suited to buildings with alternate entry/exit such as a side fire door or rear entry door to the garage to a unit.
Product is supplied with all accessories
4 x M8 Galvanised Cup Bolts with Nuts
4 x Ramset ShureDrive Anchors SDM 06050
1 x Backing plate for bottom of roller door support with pre-punched square holes.
Fully Zinc Passivated and features a hardened Herc Alloy shackle.
Also included is a stainless-steel hinging pin for superior operational protection.
Quick and Easy installation. DIY. See specifications tab for pricing.
See specifications tab for pricing
Contact us at [email protected]
For tips on how to install, see the video under the specifications tab below.
Original price was: $130.00.$82.50Current price is: $82.50.
Heavy Duty Cover plate to suit existing 90mm holes. To be used when bollards are removed from the ground hole position. For light traffic areas we also have the more popular cover plate SDCP80.
Covers one 90mm hole, can be used for all 90mm Impact security bollards including stainless steel bollards.
Ordering details : HDCP80
Dimentions of product: lower body that sits in hole is 75mm diameter. (designed to fit holes from 77mm – 90mm)
Top flat section 150mm diameter
Designed for high traffic areas
Original price was: $52.00.$39.00Current price is: $39.00.
Cover plate to suit existing 170mm holes. To be used when bollards are removed from the ground hole position.
Covers one 170mm ground hole, can be used for all 150NB Impact security bollards including stainless steel bollards.
Dimentions of product: lower body that sits in hole is 165mm diameter. (designed to fit holes from 165-170mm)
Specification / Ordering details : SDCP150
Top flat section that sits on top of concrete is 200mm diameter
Cast in sleeves are used to prevent chipping of the concrete area surrounding the bollard when in position. The sleeve allows the bollard to be inserted correctly and provides a precise locking slot for the bollard.
Holds 1 x 80NB (88.9mmO.D) bollard
Ordering details : SLV80R
For installation details, please refer to the download resources
Contact us
News
NSW Light Rail Project
LAPS has been at the forefront of protecting people and property across Australia against hostile vehicle attacks. We were recently contracted to complete a project for the light rail here in Sydney. We successfully install various perimeter security products around the secure facility in Sydney and continue to work on other projects with Coleman Rail and Acciona.
Vogue Stainless Steel Bollards
Ram-raiding Commonly vehicles are used forcefully for intrusion of commercial & industrial properties. Thieves will steal a vehicle to ram…
LAPS Vogue Impact Security Bollards to Secure Woolworths – Direct to Boot
LAPS Vogue Stainless Steel Impact Security bollards were installed across multiple sites for the Woolworths Direct to Boot shopping experience….