Cast In Sleeve to suit 80NB (88.9mm O.D) bollards
Cast in sleeves are used to prevent chipping of the concrete area surrounding the bollard when in position. The sleeve allows the bollard to be inserted correctly and provides a precise locking slot for the bollard.
Holds 1 x 80NB (88.9mmO.D) bollard
Ordering details : SLV80R
For installation details, please refer to the download resources
Size: 100mm x 250mm
Fixing Type: Commercial
Finish: New
Colour: Galvanised
Ordering details : SLV80R
Holds 1 x 80NB (88.9mmO.D) bollard
Overall Length 250mm
Approx 2.2kg
We recommend using the SDCP80 or HDCP80 with this product to cover the ground holes when the bollard is removed.
You may also be interested in
$68.20Special Offer
The GT-Lock is the ideal way to secure your garage door internally.
The GT-Lock is the ideal way to secure your garage door.
Select from two models Internal or External. The external type provides a protective shroud for protection against bolt cutters or attack from the front or top.
Suitably installed on most types of garage doors and was originally designed to protect vehicles and garage tools against theft.
Vehicle Protection or just need to take security the next level by ‘target hardening’ your property? The GT Lock is an ideal solution. Trusted across Australia and installed by leading locksmiths, handymen and builders.
Easy D.I.Y installation if you are handy on the tools.
The product may be installed on residential or commercial doors for protection against illegal forced entry. Ideally the unit should be installed in the centre of the door if under 3m and where the roller door is greater than 3m we recommend the installation of two GT Locks evenly spaced from the centre of the door out.
We also have the Internal GT-Lock model which is suited to buildings with alternate entry/exit such as a side fire door or rear entry door to the garage to a unit.
Product is supplied with all accessories
4 x M8 Galvanised Cup Bolts with Nuts
4 x Ramset ShureDrive Anchors SDM 06050
1 x Backing plate for bottom of roller door support with pre-punched square holes.
Fully Zinc Passivated and features a hardened Herc Alloy shackle.
Also included is a stainless-steel hinging pin for superior operational protection.
Quick and Easy installation. DIY. See specifications tab for pricing.
See specifications tab for pricing
Contact us at [email protected]
For tips on how to install, see the video under the specifications tab below.
Original price was: $90.00.$68.20Current price is: $68.20.
$99.00Special Offer
Safely secures your 88.9mm OD locking and removable bollards. Holds 1 bollard. Anchors included
Original price was: $130.00.$99.00Current price is: $99.00.
Stainless Steel Cover with a galvanised steel sleeve
Designed to suit the following bollards;
See specifications tab below for additional information
Cover plate to suit existing 170mm holes. To be used when bollards are removed from the ground hole position.
Covers one 170mm ground hole, can be used for all 150NB Impact security bollards including stainless steel bollards.
Dimentions of product: lower body that sits in hole is 165mm diameter. (designed to fit holes from 165-170mm)
Specification / Ordering details : SDCP150
Top flat section that sits on top of concrete is 200mm diameter
Reviews
There are no reviews yet.