Maverick Square Lighting Bollards
The Maverick lighting bollard range provides an alternative style to the commercial range of bollards.
Manufactured as a lighting bollard from aluminium, it can be matched with our fixed and locking removable range to provide a uniform consistency on your project.
For installations that require impact rated security bollards, we have the HIT (high impact threat) range of bollards, these can be covered with a polyethylene sleeve in the maverick design.
See Resources and Downloads tab for additional information.
Size: 100 x 150
Fixing Type: Commercial
Finish: New
Colour: Grey
Specifications Lorem Ipsum
You may also be interested in
LAPS high security bollards / Hostile Vehicle Mitigation Bollards (HVM) PAS68 rated.
Ideally suited for protecting entry points to large commercial buildings and government facilities against acts of terrorism.
Shallow Mounted Bollard Systems.
A shallow mount bollard system can be installed in concrete ranging from 305mm to 406.4mm depending on the level of protection required.
Fixed Or Removable Bollard Design
FB30(fixed)Â / RB30 (Removable)
Shallow Mount Fixed Bollard
Fixed in Situ bollard.
Engineered To Meet US Marshall Service Standards /PAS68 rated for 7.5T @ 80km/hr, must be installed to our specified engineered footing in an array of 5 or more bollards.
– PAS68: V/7,500(N2)/80/90:5/14
– Allowance made for Stainless Steel Sleeves – Marine Grade 316 Linished Level 4 finish
– Footing Depth – 150mm + Blinding Slab + 100mm allowance for FFL (Shallow mount Foundation)
1016mm Above Ground Bollard Height, – Bollard Diameter 203.2mm
Custom Decorative Colours Available or stainless steel marine grade 316 finish, level 4
Shallow Mount Removable Bollard
Engineered to perform against an impact of up to 7.5T @ 64km/hr, must be installed to our specified engineered footing in an array of 3 or more bollards.
– 305mm diameter
– Allowance made for Stainless Steel Sleeves – Grade 316 Linished Level 4 finish.
– Footing Depth – 112mm Shallow Foundation Plate & 280mm Socket + 100mm allowance for FFL
LAPS is proud to be distributing and installing High Security Bollards, also known as Hostile Vehicle Mitigation Bollards (HVM)
Shallow Mounted Bollard Systems.
A shallow mount bollard system can be installed in concrete ranging from 305mm to 406.4mm depending on the level of protection required.
LAPS is proud to be distributing and installing High Security Bollards, also known as Hostile Vehicle Mitigation Bollards (HVM)
Shallow Mounted Bollard Systems.
A shallow mount bollard system can be installed in concrete ranging from 305mm to 406.4mm depending on the level of protection required.
FB120
PU40 Shallow Mount
- Fixed Bollard Only
- Tested to ASTM F2656 07 M50 (K12) 6803.88 kg, 80.46 km/h, less than 1m penetration
- 406.4mm Shallow Mount Foundation
- 965.2mm Above Ground Bollard Height, – Bollard Diameter 254mm
- Custom Decorative Colours Available
Approved by the U.S. Department of Defense.
Crash ratings range from ASTM F2656 07 M50 (K-12 DOS), K-4 (DOS equal to ASTM F2656 07 M30), to US Marshall Service standards.
Manufactured from either aluminium or steel, these bollards are supplied with a band of yellow reflective tape around the top recessed section of the bollard. They provide an alternative look and style to traditional mono forged steel or aluminium bollards.
Read more about this product under the specification tab below.
The Maverick bollard range provides an alternative look to the commercial range of bollards.
Available for manufacture in two materials, aluminium and steel. The steel model is available in a heavier gauge steel for applications that require a higher security.
For installations that require impact rated security bollards, we have the HIT (high impact threat) range of bollards, these can be covered with a polyethylene sleeve in the maverick design.
See Resources and Downloads tab for additional information.
Reviews
There are no reviews yet.