Raptor Bollard Range
Manufactured from either aluminium or steel, these bollards are supplied with a band of yellow reflective tape around the top recessed section of the bollard. They provide an alternative look and style to traditional mono forged steel or aluminium bollards.
Read more about this product under the specification tab below.
Specification details are available within the Downloads and Resources tab on this page
Size: 100 x 150
Fixing Type: Commercial
Finish: New
Colour: Grey
Specifications Lorem Ipsum
You may also be interested in
LAPS is proud to be distributing and installing High Security Bollards, also known as Hostile Vehicle Mitigation Bollards (HVM)
Shallow Mounted Bollard Systems.
A shallow mount bollard system can be installed in concrete ranging from 305mm to 406.4mm depending on the level of protection required.
LAPS is proud to be distributing and installing High Security Bollards, also known as Hostile Vehicle Mitigation Bollards (HVM)
Shallow Mounted Bollard Systems.
A shallow mount bollard system can be installed in concrete ranging from 305mm to 406.4mm depending on the level of protection required.
FB120
PU40 Shallow Mount
- Fixed Bollard Only
- Tested to ASTM F2656 07 M50 (K12) 6803.88 kg, 80.46 km/h, less than 1m penetration
- 406.4mm Shallow Mount Foundation
- 965.2mm Above Ground Bollard Height, – Bollard Diameter 254mm
- Custom Decorative Colours Available
Approved by the U.S. Department of Defense.
Crash ratings range from ASTM F2656 07 M50 (K-12 DOS), K-4 (DOS equal to ASTM F2656 07 M30), to US Marshall Service standards.
The Maverick lighting bollard range provides an alternative style to the commercial range of bollards.
Manufactured as a lighting bollard from aluminium, it can be matched with our fixed and locking removable range to provide a uniform consistency on your project.
For installations that require impact rated security bollards, we have the HIT (high impact threat) range of bollards, these can be covered with a polyethylene sleeve in the maverick design.
See Resources and Downloads tab for additional information.
FB80 / RB80
- Fixed Or Removable Bollard Design
- US Depertment of State (DOS) Crash Certified K-4 (6803.88kg, 48.28 km/h) less than 1m penetration
- Engineered To Meet US Marshall Service Standards.
- 304.8mm Shallow Mount Foundation
- 1219.2mm Above Ground Bollard Height, – Bollard Diameter 203.2mm
- Custom Decorative Colours Available
Approved by the U.S. Department of Defense.
Crash ratings range from ASTM F2656 07 M50 (K-12 DOS), K-4 (DOS equal to ASTM F2656 07 M30), to US Marshall Service standards.
Reviews
There are no reviews yet.