Archer Bollards
The Archer range of bollards are manufactured from aluminium pipe and are ideally suited to be installed on low risk sites. Available with four modes being Locking & Removable, Fixed In-situ, Fixed Baseplate and lighting.
See Resources and Downloads tab for additional information.
Size: 1200 x 130 x 130mm
Fixing Type: Fixed in ground, Locking and Removable and Baseplate fixed with anchors
Finish: Powdercoated
Colour: Standard Colours (Yellow and Black) other colours from the Dulux powdercoatings range
The Archer range of bollards are manufactured from aluminium pipe and are ideally suited to be installed on low risk sites. Available with four modes being Locking & Removable, Fixed In-situ, Fixed Base plate and also as a lighting bollard which can be either fixed or base plate mounted.
Bollards can be supplied with an optional polished cap.(Un-painted)
Lighting Option
The lighting options available are globes ranging from 8 Watts to 23 Watts. The fluorescent globes are designed for long life, low power and are available in Warm, Cool or Daylight temperatures.
The bollards require connection to 240v mains power and must be commissioned by a qualified electrician.
See the specifications tab on this page for additional information
You may also be interested in
Manufactured from either aluminium or steel, these bollards are supplied with a band of yellow reflective tape around the top recessed section of the bollard. They provide an alternative look and style to traditional mono forged steel or aluminium bollards.
Read more about this product under the specification tab below.
The Maverick bollard range provides an alternative look to the commercial range of bollards.
Available for manufacture in two materials, aluminium and steel. The steel model is available in a heavier gauge steel for applications that require a higher security.
For installations that require impact rated security bollards, we have the HIT (high impact threat) range of bollards, these can be covered with a polyethylene sleeve in the maverick design.
See Resources and Downloads tab for additional information.
FB80 / RB80
- Fixed Or Removable Bollard Design
- US Depertment of State (DOS) Crash Certified K-4 (6803.88kg, 48.28 km/h) less than 1m penetration
- Engineered To Meet US Marshall Service Standards.
- 304.8mm Shallow Mount Foundation
- 1219.2mm Above Ground Bollard Height, – Bollard Diameter 203.2mm
- Custom Decorative Colours Available
Approved by the U.S. Department of Defense.
Crash ratings range from ASTM F2656 07 M50 (K-12 DOS), K-4 (DOS equal to ASTM F2656 07 M30), to US Marshall Service standards.
Reviews
There are no reviews yet.