$120.00Special Offer
Secure Storage Holder 80NB (Holds 2) Model: SSH280
Original price was: $165.00.$120.00Current price is: $120.00.
Secure storage holder to suit 80NB locking removable bollards. Available with masonry anchors.
Holds 2 bollards 88.9mm OD
Size: L230 x W120 x H150mm
Fixing Type: Masonry Anchor
Finish: Powdercoated
Colour: Black
Ordering / Specification model: SSH280
Secure storage holder to suit 80NB (88.9mm Outside Diameter) locking removable bollards. Available with masonry anchors.
Holds 2 bollards
Suits all LAPS Impact Security SPT90R, VOG80R, VOGC80R, Spartan 80NB (88.9mm OD) locking and removable bollards,Vogue Stainless steel 80NB (88.9mm OD) Also suitable for Leda Securapost Removable steel and stainless steel bollards. 88.9mm OD bollards such as the XP90R, SP90R, SSP80R, SSR80R
L230 x W120 x H150mm overall
You may also be interested in
$55.00Special Offer
Roller Door Security
When fitted the roller shutter cable assembly increases the security on any roller shutter door by not allowing the door to be opened/lifted without the bollards being removed.
Many high end supply chain warehouses insist on using this product and when combined with LAPS Spartan Impact Security Locking and Removable bollards provides an increased level of security on your premises to protect against illegal forced entry or ram raid style attacks.
When ordering part number Model RSCA55 to your order.When fitted the roller shutter cable assembly increases the security on your roller shutter door by not allowing the door to be opened/lifted without the bollards being removed.
In most cases the cables are installed inside behind the roller door where possible. For high threat premises, we recommend the installation of LAPS Impact Security bollards outside the roller door as well as inside combined with the roller door cables.
If you would prefer a padlock style solution, see the GT-LOCK
Ask about our alarm systems and surveillance packages to total peace of mind.
Original price was: $85.00.$55.00Current price is: $55.00.
Stainless Steel Cover with a galvanised steel sleeve
Designed to suit the following bollards;
See specifications tab below for additional information
LAPS is proud to be distributing and installing High Security Bollards, also known as Hostile Vehicle Mitigation Bollards (HVM)
Shallow Mounted Bollard Systems.
A shallow mount bollard system can be installed in concrete ranging from 305mm to 406.4mm depending on the level of protection required.
LAPS is proud to be distributing and installing High Security Bollards, also known as Hostile Vehicle Mitigation Bollards (HVM)
Shallow Mounted Bollard Systems.
A shallow mount bollard system can be installed in concrete ranging from 305mm to 406.4mm depending on the level of protection required.
FB120
PU40 Shallow Mount
- Fixed Bollard Only
- Tested to ASTM F2656 07 M50 (K12) 6803.88 kg, 80.46 km/h, less than 1m penetration
- 406.4mm Shallow Mount Foundation
- 965.2mm Above Ground Bollard Height, – Bollard Diameter 254mm
- Custom Decorative Colours Available
Approved by the U.S. Department of Defense.
Crash ratings range from ASTM F2656 07 M50 (K-12 DOS), K-4 (DOS equal to ASTM F2656 07 M30), to US Marshall Service standards.
The Maverick lighting bollard range provides an alternative style to the commercial range of bollards.
Manufactured as a lighting bollard from aluminium, it can be matched with our fixed and locking removable range to provide a uniform consistency on your project.
For installations that require impact rated security bollards, we have the HIT (high impact threat) range of bollards, these can be covered with a polyethylene sleeve in the maverick design.
See Resources and Downloads tab for additional information.
Reviews
There are no reviews yet.