Cover Plate 77-90mm hole Standard Duty
Standard Duty cover plate to suit existing 77-90mm ground holes. To be used when bollards are removed from the ground hole position. Ideal for pedestrian and light traffic areas. If you require the heavy duty model, the part number is HDCP80
Covers one 77-90mm hole, can be used for all 88.9mm / 90mm Impact Security ® removable bollards, Securapost 90mm removable bollards including Vogue stainless steel models.
Ordering details : SDCP80
Dimension of product: lower body that sits in hole is 75mm diameter. (designed to fit holes from 77mm – 90mm)
Designed for light pedestrian and low traffic areas.
Top flat section 150mm diameter with a 3mm profile. (ideal for forklifts and pedestrian areas)
Size: L100 x W100 x H100
Fixing Type: Manual Placement
Finish: Powdercoated
Colour: Black
Fits holes 77-90mm
150mm flat round section
3mm profile (thickness)
Powdercoated :Black
You may also be interested in
$68.20Special Offer
The GT-Lock is the ideal way to secure your garage door internally.
The GT-Lock is the ideal way to secure your garage door.
Select from two models Internal or External. The external type provides a protective shroud for protection against bolt cutters or attack from the front or top.
Suitably installed on most types of garage doors and was originally designed to protect vehicles and garage tools against theft.
Vehicle Protection or just need to take security the next level by ‘target hardening’ your property? The GT Lock is an ideal solution. Trusted across Australia and installed by leading locksmiths, handymen and builders.
Easy D.I.Y installation if you are handy on the tools.
The product may be installed on residential or commercial doors for protection against illegal forced entry. Ideally the unit should be installed in the centre of the door if under 3m and where the roller door is greater than 3m we recommend the installation of two GT Locks evenly spaced from the centre of the door out.
We also have the Internal GT-Lock model which is suited to buildings with alternate entry/exit such as a side fire door or rear entry door to the garage to a unit.
Product is supplied with all accessories
4 x M8 Galvanised Cup Bolts with Nuts
4 x Ramset ShureDrive Anchors SDM 06050
1 x Backing plate for bottom of roller door support with pre-punched square holes.
Fully Zinc Passivated and features a hardened Herc Alloy shackle.
Also included is a stainless-steel hinging pin for superior operational protection.
Quick and Easy installation. DIY. See specifications tab for pricing.
See specifications tab for pricing
Contact us at [email protected]
For tips on how to install, see the video under the specifications tab below.
Original price was: $90.00.$68.20Current price is: $68.20.
$82.50Special Offer
The GT-Lock is the ideal way to secure your garage door externally
Original price was: $130.00.$82.50Current price is: $82.50.
Cast in sleeves are used to prevent chipping of the concrete area surrounding the bollard when in position. The sleeve allows the bollard to be inserted correctly and provides a precise locking slot for the bollard.
Holds 1 x 80NB (88.9mmO.D) bollard
Ordering details : SLV80R
For installation details, please refer to the download resources
Cast in sleeves are used to prevent chipping of the concrete area surrounding the bollard when in position. The sleeve allows the bollard to be inserted correctly and provides a precise locking slot for the bollard.
Holds 1 x 150NB (165.1mmO.D) bollard
Ordering details : SLV150R
When using this product on a new installation / project, we also recommend using the cover plate to suit which is model number SDCP150 or the heavy duty model HDCP150 where heavy vehicles are used.
For installation details, please refer to the download resources
Reviews
There are no reviews yet.